How to Change IP Address on Imax touch Pano
Updated: 09/18/2017
Article #: 27
Please follow below short video on how to change IP address for Imax Touch Pano
Once you do please put the new IP in QuickVision settings see below
Note: You must make sure the Pano is set to the same IP scheme as the capture PC (here, when we say IP scheme, we mean the first three series of numbers 192.168.1.xxx). Or you may also assign a secondary IP to the capture PC with the same scheme as the Pano.
|
Rate this Topic:
|
|||
|
